Brother Printer Won’t Scan: Amazing Hacks To Resolve

The Brother printer is one of the most reliable, user-friendly and operative printers available in the market. It is used for the purpose of printing, scanning as well as for faxing. But no technology is flawless. If you are also experiencing the same failure, then do not panic. The errors are fixable. Go through this article and avail ways to fix the scanning issue of Brother printer.

Resolve Brother Printer Won’t Scan

You can go through some easy steps below which will help you drive out all of your worries:

Review The Printer

To begin the process first, open the device and then go to the left-hand lower corner. Towards the corner select the Start menu and then, in the address bar type “cmd”. This process will open the Control Panel. Choose the Hardware and Sound option from the list and then scroll down until you discover Devices and Printers option. Click on that option as soon as it appears on your display. Right click on the Printer Properties opportunity from the Brother printers records. Select Print Test page and review if the printers can print correctly.

Check Scanner Operator

Open the device and then from the list choose on the scanner by right-clicking on it. After this process, then open the Command prompt by searching “cmd” on the address box. Later in the search bar, search for the scanner and then, select View scanners and cameras option. Review if the scanner icon exists. If the figure doesn’t exist, then download the software in the device and operate the Brother printer.

Review IP Address

Open the device and click on the Menu option of the printer. Choose Print Reports and then, click on the Network Config. Select the Ok option after the process ends. Select the Black or Color Start and after that click on the Exit option. Restart the device after the operation. Check for the IP address once the machine relaunches.

Operate Firewall Settings

Most of the time the scanning error occurs because of the firewall of the system blocks the printer software. To prevent the firewall first, select the Windows Firewall option and after that pick the Network and Sharing opportunity. Review the locations of the networks and then go to the View active networks sector and then hit Enter. Again navigate to the Control Panel and select the Windows Firewall alternative. Choose Turn on or off the Windows Firewall option and then select Turn off Windows Firewall for your network location. To save the process pick the Ok option.

Leave A Comment