Many HP Spectre x360 user witness unusual overheating of the system. The intensity of the heat is so severe that it can burn the whole system down. Users are also clueless about how to cool down the temperature of their HP computer. If you are facing the same dilemma, then this article will help you to solve the overheating problem of the HP Spectre x360.
When you power on the computer it usually generates some amount of heat. But sometimes when the machine is not functioning properly then it might produce a tremendous amount of heat which can be hazardous for your device.
There can be multiple reasons why your HP Spectre x360 generating so much heat. System overheating can occur due to excessive gaming or extensive multitasking. Due to multitasking, the impact falls on the CPU directly as it has to operate in high octane pressure or capacity. Overheating can also occur if you are using the system in a high-temperature environment. So these are some underlying causes of excessive heating of HP Spectre x360.
Cool Down Your System If Your HP Spectre x360 Running Hot
Before going to the advanced solutions, first, use simple hacks to minimize the temperature of your HP computer. If your HP Spectre x360 is generating too much of heat, then install fans to enhance the air flow. There are various good quality computer fans available in the market. So purchase a good fan and install it.
You can also solve the heating problem by doing a thorough cleaning of your system. To begin the cleaning process shut down your computer first and disconnect all the plugs and cables. Then open the case of your PC and dust of all the components present inside the system. Also, clean the motherboard with the help of the fan.
If your problem is solved after implementing the solution as given, then there is no need for further diagnosis. Otherwise, go through the solution as given below.
Change Settings Of Power Option
Users can witness overheating problem in their HP Spectre due to dodgy Power option. You can modify its format and see if the issue is solved or not. To change the settings, press Windows and X key from the keyboard and select Power Options.
After selecting power options, access Settings of Additional Power and choose Change plan settings. Next, select the tab “Change advanced power settings”.
After that expand the list of Processor power management and then click System cooling Policy. Choose Passive then tap Apply and click OK to make the changes.
Eradicate Bloatware From Your HP Computer
Overheating can also occur due to the presence of dubious HP program in your machine. Inspecting the program triggering the issue needs extra attention to those wary programs.
Hence press the Windows key and X at the same instant then select Task Manager. Choose the CPU tab. Now click all the programs that are eating the entire space of the USB usage and tap End Task.
After removing the junk programs, users need to go to the Control Panel. Use view by Category and Uninstall the program(s). Also Delete some irrelevant apps as well. Since the heating issue can be linked to specific HP programs. Hence it is better to remove the HP programs that you rarely use.
Solve Problem By Enabling Low Power Mode In BIOS
If you are encountering the problem of overheating in your system, then opt for lower power CPU state. To initiate the process open the BIOS of your HP computer. Then use Performance mode in BIOS and choose Balanced mode. This minimizes the power usage that will decrease the System operating temperature. After activating the low power mode in BIOS, it will help you to resolve the overheating of your computer. Also, you can open the BIOS by tapping the F10 button for continuous startup. Else, go to System
Configuration tab and choose the power scheme and then tap Balance. After making necessary changes click Exit.
Users can try another method to lower down the power mode with the help of HP Cool Control. So to activate the cool control go to Control Panel by clicking the Start button. Then navigate the list and choose lower power inside the Cooler CPU mode.
Resolve Internal Cooling
After performing all the software hacks, let’s get back to the hardware cleaning. The first thing you need to clean the fans that help to cool down the CPU and the Graphics Unit. Since they build thick layers of dirt and impurities that block the airflow. Hence it is necessary to clean the fans you can take help from the manuals to open these intricate parts of your laptop.
But before that, you need to power off your laptop. Disconnect the battery and unplug the power cords and strips. Now with the help of cotton swab clean the fans. Use alcohol instead of other liquid solution. Users can also use a vacuum cleaner to dust off the dirt that got stuck on the fans. After that clean the exhaust port with the help of vacuum cleaner. You can find the port on the corner of the laptop. The exhaust port is the small openings which are an outlet for the hot air. So clean these small grills so that you can fix the overheating problem.
Place Your Laptop On A Flat Surface
Generally, laptop extracts cool air from the surface. If you keep your system on an uneven surface like a blanket or pillow, then the airflow gets restricted. Due to this the temperature of the laptop increases and the laptop gets affected.
Hence to avoid this situation keep your Laptop on a flat or hard surface. You can also use a laptop holder or stand to prevent the overheating of the device.
To Round Up
Overheating of the laptop is a typical issue that every user encounter from time to time. Fortunately, we can avoid these issues by taking proper care of your laptop. So follow the essential steps to minimize the overheating problems as mentioned above.