Belkin is a well-known brand for its electronic products. Router, charger, and other accessories are the different products from the house of Belkin. However, you may be stuck with some network related issue while using the Belkin router then to fix it the reset is the best option. In this article, you will get the full guidelines, and the ways to factory reset Belkin router.

What Is The Need Of Factory Reset Belkin Router

If you forget the password of the Belkin router after changing it, then you will not be able to change the settings of the router. Factory reset Belkin router is the best option to fix the problem. Now let us proceed to learn the procedure of how to factory reset Belkin router.

Ways To Factory Reset Belkin Router

There are two different ways to reset Belkin Router. Follow the procedures mentioned below according to your preference. By applying the steps, you can be able to reset the Belkin router on your own.

Way 1: Soft Factory Reset Procedure

To begin with this procedure at first, you need to find the IP address of your system. And to do this, first, you need to open the Command Prompt. This can be done by pressing the Windows key along with the R key and after that type cmd on this Run box and hit Enter. Now on this appearing Command Prompt type ipconfig and after that again press Enter. Now from this Command Prompt window, you will find Default Gateway under the Wireless LAN adapter Wi-Fi section. Beside this Default Gateway, you will find a number, copy the same. This number is the IP address of your system, and then paste it on the address bar of your browser.

The above procedure will take you to a page where you need to provide the router Username and Password. After that navigate to the Advanced Settings from this window and select Reset Factory Restore. This process will cancel all the changes made to the router and reverting back to its default settings.

This process can only be taken over if you remember the present Password of the router. And these process is generally made to heal all the changes of settings made by the user.

But if you even forget the set password of your router then also nothing to worry. The below procedures is generally for those who have forgotten the password of the Belkin router.

Way 2: Hard Factory Reset Of Belkin Router

This is an easy as well as the most followed procedure to factory reset Belkin router. Now let us proceed towards the process to make it end and resolve the issue.

At first turn on your router and then locate the reset button. The reset button is generally present inside of a tiny hole, which usually locates in the back-side or the below portion of the router, totally depends upon the router’s model. After that take a thin pin, it may be a paper-clip so that you can easily access the switch. And then insert this pin on the reset button and hold for 20-30 seconds, this time period also differs with the router’s model. And then it will start to reboot, don’t disturb during this process. After that check the lights of the router, if it becomes stable, then it means the resetting process is over.

Further, you need to restart your whole system before using the router connection. By rebooting the system, it allows enough time to accept the changes of the router which you have made.

These are the two acceptable procedures which you can follow to factory reset Belkin router on your own.