Windows 10 error code 0xc00002225 generally occurs when the system cannot access the BCD at the time of the boot. The Boot Configuration Data or BCD is an essential file that helps Windows to Boot correctly. When you encounter this error, then it is necessary to resolve the issue as quickly as possible. This type of problem is more prevalent in newer UEFI specification rather than the older BIOS version. If you encounter Windows 10 error code 0xc0000225, then read this article to get relevant information.

Practical Techniques to Resolve Windows 10 Error Code 0x0000225

After getting familiar with the potential causes of the error. Let us see the useful and straightforward methods to fix the error. Here is a list of a few valuable solutions that will fix the error with ease.

Perform Automatic repair

Before proceeding to the complicated part of the solution, users can troubleshoot the issue by running the automatic repair tool. To start the process first turn off your PC and place the USB flash drive or a DVD. Then quickly restart your machine. For USB flash drive tap the right functional key. For CD or DVD, you will get an option to press any key. Thus do as what your system says and boot.

Next set the language preference according to your choice and then select ‘Repair your computer’. After that, you will get three option to choose, select Troubleshoot. In the Troubleshoot window, you need to choose Advanced Options. Once you are inside the Advanced options tab, click Automatic repair to start the repair process. When the process is complete, restart your computer. Now check if the error is resolved.

Rectify The Boot Files

To begin the operation, you need to Boot your System via Windows media. Tap Next and select Repair your computer. After that navigate to Troubleshoot window then head straight to Command Prompt. Now you need to type some specific code in the command window. Hence type bootrec/fixmbr,bootrec/scanos and bootrec/rebuild. After entering these necessary commands press A to enable installation and hit Enter. Then exit the window and again restart the PC.

Deactivate The Driver Signature Enforcement

When you are witnessing the Windows 10 error code 0xc0000225 then immediately press f8 key to open the Startup settings. Now hold f7 to disable the driver signature. If you are not facing any startup problem, then download the updates and reboot. Else uninstall any recently upgraded file or driver. If the error persists, then deactivate the driver signature permanently.

In the second stage of the procedure launch the Command Prompt. After you enter Command Prompt write bcdedit-loadoptions.-Disable-checks. After that reboot your machine. Check whether you are able to eradicate the error or not. If you want to enable the driver signature enforcement, then type enable instead of disabling.

Resolve the Corrupt System Files

To repair the faulty or corrupt system file you need to perform SFC scan. First, click the command prompt from the start menu. Next, in this window, you need to type SFC/Scannow then tap Enter through a keyboard.

Now the tool automatically initiates the process, and all the system files will be thoroughly scanned. If they can locate any problematic or corrupt file, then it will notify you. Also, it will clear the faulty file and replace it with a new one. When scanning is complete, users need to restart their system to troubleshoot the error.

Highlight Partition As Active With The Help Of Diskpart

With the help of built-in Diskpart utility, you can fix the error code. In this process, you need to mark a partition as active by using the Diskpart. Hence to modify the Disk status you need to boot your system through Windows install disc. Select Repair your PC after choosing various options. Then select the installation drive that is C drive and click on Next. After that open the Command Prompt, if you notice the recovery options tab. Enter the following key and execute it one by one. First write diskpart, volume list, select volume and at the last enter active.

  Fix The UEFI Boot Loader

There is another way to troubleshoot the Windows 10 error code 0xc0000225 is to repair the boot loader. Thus to fix the UEFI boot loader you need to boot your machine. Then skip the language option window. After that, click Repair your computer. Next, navigate to the command prompt by selecting the troubleshoot option. Write diskpart in the prompt and hit Enter. After that, users need to write list volume and tap Enter. Examine the volume number of the System Reserved. Once the verification is over, then type select volume 1 and tap Enter. After that write Exit to close the command window and restart your system.

Restore Your System

If you still cannot troubleshoot the issue, then it is better to restore your machine. By reverting to the default version all the damaged files and items will be erased. In this way, you can kick the error out of your PC. But before resetting your PC you need to store their essential files in an external hard drive or create a backup. Since when you begin the process of reset Windows will delete all the data and files. So it is always a good practice to have a backup of all your important items and data.

Now go to the Settings option and search for the update and security tab. After entering the window, go to the Recovery tab. In the Recovery option select reset the PC.

In this penultimate stage follow the steps carefully as and when it appears on the screen. Here users need to filter all the stored data. When the restore is complete, you need to verify whether you can run the update process or not.

To Round Up

After going through this article, hope now you know how to fix the Windows 10 error code 0xc0000225. It is not a critical issue as it appears to be, but users need to be thorough with the troubleshooting techniques in order to prevent it from further occurrence.