How To Login Your EarthLink Router: Quick Tips

A wireless router is a networking tool. It performs as a gateway connecting your PC and your high-speed modem. It also performs as a wireless access point, allowing your wireless-enabled devices to interact with it and even connect to the Internet wirelessly. In order to log in to the EarthLink router, you must know “How to log in to the router’s address?” Therefore, there are a number of reasons, you might require to login to an EarthLink wireless router. Apparently, the two most popular reasons behind logging in to the router are for the basic wireless network adjustments and firmware updates. Whatever the case may be, the process is quite easy.

Here in this article, we will guide you through some foolproof steps to log in to your EarthLink router. Learn these steps, and you’ll be well on your way to becoming a Google executive.

Easy Fixes: How To Login EarthLink?

In this section, we have provided some tried and tested method that can help you to log into your EarthLink.

Process 1:

Primarily, start a web browser to access the router’s IP address or URL. In case, if you don’t recognize the address, then go to the manufacturer’s website to find the address. There may be various addresses that you can use.

Process 2:

Now, simply put in the router’s username and password. There, the default username for maximum routers is “admin,” and the default password is “password,” or even sometimes, there is no password. If you want to replace the username or password from the defaults, then you need to enter your Username and Password.

In case, you have forgotten your username or password; you will need to follow your manufacturer’s instruction to reset its factory defaults.

Process 3:

Furthermore, you can simply select the settings menu links which you want to enter. There, on the wireless router’s main page, you will see several links that allow you to modify your router’s settings. These also allow you to change your wireless router’s password and even to change network name as well.

Note- Any additional changes you perform to your wireless router may affect the ability of your wireless devices to connect to the network. It may also need that you change their settings to reflect the changes that you executed to the router.

Process 4:

Moreover, now you need to Save Your Changes and then simply log out. If you have performed any additional changes to your Earthlink wireless router settings, then you need to click Apply or Save option. But, before exiting from the settings menu option,  you have to complete making changes. So, you can select the Log out option.

Note- If you move from the page open for more than ten minutes, then you automatically logged out of the wireless router.

Can’t Log In To Your EarthLink Router?

After following the above-mentioned steps, if you still can’t log in to your Earthlink Router? Here, we have provided some other ways as well. In that case, simply follow these steps and solve it on your own:

Step 1: At first, you can connect a PC and your EarthLink router directly with an ethernet cable, putting an end in one of the Earthnet router LAN ports. Then, verify whether both the ends are secure or not.

Step 2: There, you need to check the Internet LED is lit. If it is not, then you need to troubleshoot the light status.

Step 3: Then, you can check that the LEDs for the ports with cables are lit. In case, they are not, then you can try moving the cable to another port. If you see still no lights, then you need to troubleshoot the light status.

Step 4: After this process, you can verify that the LED on the Ethernet adapter is lit. In case, it is not; then you need to troubleshoot the adapter (don’t continue with the following steps).

If EarthLink did not make the Ethernet adapter, then simply contact the adapter’s manufacturer.

Step 5: In such times, you can click on the Start button and then select the Run option.

Step 6: Now, enter cmd and then type ping 192.168.1.1.

Step 7: If you get a message “Request timed out,” displays, then enter to make sure that your machine is not making a connection to the router.

Otherwise, your system is connected to the Earthlink router.

Additional Tips: Login to Earthlink Router

  • Firstly, assure proxies are not enabled. If you are using the Internet Explorer, then click on the Tools option amd then select the Internet Options. After that, you can tap the Connections button. Then, simply hit the LAN Settings. Now, you need to uncheck the “Use a proxy server for your LAN” option.
  • Furthermore, delete offline content. Then, click on the  Tools and then select the Internet Options, now, simply click on the Delete Files.
  • There you will see the Delete all offline content option simply select it, and then click on OK.
  • Alternately, you can try accessing with a different PC or with a different browser.
  • Finally,  Delete cookies and then try to log in to your EarthLink router.

WARNING: Don’t do this process, if the websites you visit need cookie details such as your logins and passwords.

Hopefully, now you got the EarthLink Router login page with the help of these effective ways to access the router settings. If this article helpful for you then you can share your feedback with us.