Epson printers are appreciated globally for their remarkable accomplishment and long-drawn performances. But recently users are complaining the printers begin to produce a disturbance in their daily work. There are numerous disputes associated with them. For example, suspend operating unexpected, stops print and pops up delusion codes.

Similarly, Epson error code 0x97 is one of the common error. The issue generally occurs because of an internal hardware effect. The crashing of the motherboard also happens with this error, and along with that, the system freezes completely. Moreover, the error generates on the printing process is continuing. Thus it stops the printing and further stops the users work. The failure is a signal for the difficulty among the internal hardware. The internal parts of the motherboard fail, and suddenly the device stops completely. But do not worry, as this problem is also fixable. Read the guide and check for the best-in-class resolves for the error 0x97.

Methods To Fix Epson Error Code 0x97

General Process

Open the device and then select the Start menu from the lower left corner. Choose the Turn off option there and then disconnect. Detach all cords and USBs as well as the memory cards from the device. Provide the device some time and wait until the printer calms down. Press and hold the Power button for about 60 seconds. Make sure you do not release the key within that period. After the process completes, connect the cables and again press the Power button for 60 seconds. Free the power switch. Indicate if error information still arrives on the screen.

Try Unplug And Again Plug-in

As soon as, the error pop up messages appear on display, first, switch on/off the power and after that unplug. Plug out all the associated cords. Also, disconnect the USB operators. Separate the printer and other external devices attached to the system. Hold the Power key and release residual current from the printer. Now plug in the cords and the USB. Again install printer cartridges and switch on the Power button. Check if the error popup appears. If the error exists, then continue with the following way.

Pick Operate Printer Online Option

Press the Windows key and X keys at the same time. Begin the Control panel and then pick Devices and Printers. Choose Printer and scroll down until the Offline mode appears, then select the option. Now Tick on the Ready option and then fix the printer online. Once the procedure ends, then save the changes.

Clear The Mechanic Pad

Open the device and then switch on the Printer and after that disconnect it. Eliminate the cover of the printer and then wipe the cleaning pads. Wait until the devices clean appropriately and then connect the systems and the cords and eventually switch on the machine. Check for the error in the printer.

Start The Device Again

Remove all open-ended printer functions and simultaneously disconnect all the wires. Unlock the printer and clean any ripped paper if any. Now wipe the rollers and the internal parts of the printer. Remove the printer cartridges. After the process ends, connect all the cords and power on the printer.

Renew The Driver Manager

If the issue is yet not fixed, then renew the operators. To begin the method, start the machine and later pick the Start menu. Select the Device Manager option and press the Expand Printer alternative. Update Driver by clicking right on it and then begin the process. Restart the device after the procedure.

Connect With The Missing Operators

Open the device and then in the address bar type the name of any web browser and click on it. Download the Operating Systems Troubleshooter and install it in the system. Run the troubleshooter and scan to identify the error exists in the device. If an operator is missing, then introduce them immediately into the system. Choose the Device Manager option from the list by clicking on it. Now navigate to the Printers option and select it. Right click on the Printers issue alternative and start the updatation process.

Clear The Head Nozzles

As the user cleans the printer, it will eventually clear the hardware’s associated along with it. Restart the device and disconnect the printer attached with it. Unlock the printer casing. Take a clean paper towel and clear the mechanism. Establish the print origin to the kernel so that the ammonia-soaked network is below it. Wait for about 12 hours and check for the fixes. Reconnect the cords and wires and begin the device and the printer and check if Epson error code 0x97 still exists.

Restore Corrupt Printer Parts

The 0x97 error symbolizes corruption in the motherboard as well as indicates broken parts of the printer. So this error could get solved by restoring or eliminating useless parts. By renewing the motherboard with a current one, the error could get removed. Check if after replacing the system with the latest version of the motherboard the problem should be solved.