Windows 10 is one of the most popular Operating Systems that is widely used by millions of people throughout the world. The Memory Management error is also known as BSOD (Blue screen of death) error. This problem is quite troublesome, and it requires the users to search for significant solutions to get rid of it. However, in case you are unable to find helpful solutions, this post will cover all the aspects as your requirement to resolve the issue. This error prevents you from booting into your system.

One of the main reason that is responsible for this issue is incompatible software, the hardware you recently configured for your system, outdated BIOS, outdated graphics driver, etc. In most cases, this error message is only on the screen, compelling users to reboot their devices. However, it may crash the PC and sometimes even clash loop.

The most common solution to this problem is to restart your computer. After restarting, you will no longer receive this error message. So, before doing anything else, restart your computer and see if the problem has been resolved.

By any chance, if you are also facing the same problem then fix it as immediate as possible. Read the whole article and find a suitable solution regarding your issue.

Resolve Windows 10 Memory Management Error With Effective Hacks

Go through the procedures mentioned below. Hope, you will surely fix the issue by solving the steps.

Solution One: Run SFC Scanner

This is the primary solution you may follow to solve the issue. It is quite helpful also. Most of the users who are facing the memory management error can get relief by running the SFC/SCANNOW command. At first, open your computer then navigate to the Start menu button and choose it by right-clicking on it. After that, move to the Command Prompt section. In this type “sfc/scannow” and press Enter key from the keyboard. Then, wait for a minute and check if the process works and ultimately solves the issue.

Solution Two: Disable The Antivirus Software

If your machine gets attacked by viruses or malware, then you may get the error also. There are some instances where antivirus conflicts with specific software, it may crash, or it can show the memory management error. There are lots of ways to disable the unnecessary antivirus software. To disable the antivirus, at first, tap on “Settings” that is located under the option “Start” Menu. Select the option “Update & Security.” Then, choose the option “Windows Security” that is in the left side and click on “Open Windows Defender Security Center.” After selecting the option open the Windows Defender’s Settings, and tap on the option “Virus & Threat Protection Settings.” Now, click on the icon “Real-Time Protection,” “Cloud-Delivered Protection” and “Automatic Sample Submission” to switch off the Windows Defender. Now, restart your system and see if this made any difference after disabling the Antivirus. Always be alert while disabling your antivirus software because sometimes the system gets damaged.

Solution Three: Perform A Clean Boot

Booting can resolve the stop code memory management error as well. Hence, you need to perform a clean boot for your device. To do so, first of all, tap and hold down the Windows and R keys simultaneously. It will help you to load the Run dialog bar. In the dialog box, type “msconfig” and you will find that the System Configuration utility will open. Now, hit the Enter key. Then, in the Services tab review the “Hide all Microsoft services check box.” After that, choose the “Disable All” option to disable Microsoft’s services. Next, tap on OK and apply the changes. Now finally, restart your device and check if the solution runs. If it does not work, then follow the next fix.

Solution Four: Manually Increase Virtual Memory

Seldom by increasing the virtual memory of your device can resolve the glitch as well. At first, navigate to the Start option. In the search box type “advanced system settings.” Now, double-click on the result and choose the “Advanced” tab and tap on the option Settings that is under the Performance section. Then, again tap on the Advanced tab. Next, navigate to the Virtual memory tab and then choose the icon Change. After that, clean “Automatically manage paging file size for all drives” bar. Now, tap on the option Drive(Volume label) and select Custom size as you prefer. Finally, add a new minimum and a maximum size (MB) and hit on the Set option.

Solution Five: Check External Hardware Devices

An external device like the USB adapter, external modem, mouse keyboard that are connected to your device may cause the problem. Thus, try to disconnect all your peripheral connections.

If you find everything is normal and you are not facing the issue anymore, then you need to connect an external device one by one at the moment. If your computer’s screen turns blue again, you can recognize the device which was responsible for the problem. Disconnect the device from your computer and restart your system. You may get rid of the issue by this process.

Solution Six: Run A System Restore

After performing a hard reset switch off your device by pressing the power key for at least 10 seconds. After turning on your sytem from the Start menu, select Advanced. From that section, select System Restore.

This process will remove the apps, drivers, updates that seem harmful to your device. From the System Restore, tap on the option “Choose a different restore point” and then on Next. After that, select a restore point that creates a problem for you. At last, choose Finish and check if the error still appears or not.

Remember one thing that, this process may delete all the information and date containing on your computer. So, you need to keep a back up of the information properly.