Logging into your router’s web page allows you to set up and manage your wireless network. The web page for Arris router is basically a control panel for it, from where all its settings can be changed if needed. You just need to connect your router to your computer either through WiFi or through a LAN cable. You also need a web browser to access the router’s web-based homepage. Here, in this article, we have provided the detailed process of logging into your Arris router, and also the necessary troubleshooting steps. So, if you are facing problems while logging in to your router’s web page, follow these guidelines to resolve the issue.
Arris Router: Login Instructions
Make sure you are connected to your Arris router either wirelessly or via an ethernet cable. If you are not connected, you won’t be able to access the router’s web page. After you have connected your Arris router to your computer, follow the steps given below to log in to it
- Open a browser of your choice and type in the Arris router’s default IP address: 192.168.0.1. Hit Enter.
- The Arris web interface will now open and ask for your Username and Password.
- Enter the username and password that you have set. If you haven’t set any username and password, enter the default values of them.
- The default username is “admin” and the default password is “password.”
After logging in to your Arris router’s web page, you can modify any settings from there. Make sure to note the current settings somewhere, so that if you have any problems with changed settings, you can always revert to those.
Arris Router LogIn: Easy Troubleshooting
If you have any trouble while logging in, or if you have made any changes that disconnect the router network, you can try performing a hard reset on your router.
To hard reset your router, first, locate the reset button which is generally located at the backside of your Arris router. Look for a small dent at the back, which when pressed with a sharply pointed object like a pin, will reset your router to the factory settings.
Next, press the button with a pin for about 15-20 seconds while the router is powered on. This should reset your Arris router to factory settings. After this, you need to reconfigure your router.
If you have noted down the settings, as mentioned before, you can try entering those values to configure your router.
These are the necessary steps and the basic troubleshooting to log in to your Arris router without any hassle. Hope, after following the processes mentioned in this article, you can log in to your router without any trouble.